Thursday, November 18, 2010

how to hack an ethernet ADSL routers

ADSL-RoutersAlmost half of the Internet users across the globe use ADSL routers/modems to connect to the Internet however, most of them are unaware of the fact that it has a serious vulnerability which can easily be exploited even by a noob hacker just like you. In this post I will show you how to exploit a common vulnerability that lies in most ADSL routers so as to gain complete access to the router settings and ISP login details.
Every router comes with a username and password using which it is possible to gain access to the router settings and configure the device. The vulnerability actually lies in the Default username and password that comes with the factory settings. Usually the routers come preconfigured from the Internet Service provider and hence the users do not bother to change the password later. This makes it possible for the attackers to gain unauthorized access and modify the router settings using a common set of default usernames and passwords. Here is how you can do it.
Before you proceed, you need the following tool in the process
Angry IP Scanner
Here is a detailed information on how to exploit the vulnerability of an ADSL router.
Step-1: Go to www.whatismyipaddress.com. Once the page is loaded you will find your IP address. Note it down.
Step-2: Open Angry IP Scanner, here you will see an option called IP Range: where you need to enter the range of IP address to scan for.
Suppose your IP is 117.192.195.101, you can set the range something as 117.192.194.0 to 117.192.200.255 so that there exists atleast 200-300 IP addresses in the range.
 
Step-3: Go to Tools->Preferences and select the Ports tab. Under Port selection enter 80 (we need to scan for port 80). Now switch to the Display tab, select the option “Hosts with open ports only” and click on OK.
IP Scanner
I have used Angry IP Scanner v3.0 beta-4. If you are using a different version, you need to Go to Options instead of Tools
 
Step-4: Now click on Start. After a few minutes, the IP scanner will show a list of IPs with Port 80 open as shown in the below image.
IP Scanner
 
Step-5: Now copy any of the IP from the list, paste it in your browser’s address bar and hit enter. A window will popup asking for username and password. Since most users do not change the passwords, it should most likely work with the default username and password. For most routers the default username-password pair will be admin-admin or admin-password.
Just enter the username-password as specified above and hit enter. If you are lucky you should gain access to the router settings page where you can modify any of the router settings. The settings page can vary from router to router. A sample router settings page is shown below.
Router Settings Page
 
If you do not succeed to gain access, select another IP from the list and repeat the step-5. Atleast 1 out of 5 IPs will have a default password and hence you will surely be able to gain access.
 

What can an Attacker do by Gaining Access to the Router Settings?

By gaining access to the router settings, it is possible for an attacker to modify any of the router settings which results in the malfunction of the router. As a result the target user’s computer will be disconnected from the Internet. In the worst case the attacker can copy the ISP login details from the router to steal the Internet connection or play any kind of prank with the router settings. So the victim has to reconfigure the router in order to bring it back to action.

easiest way to hack into others system

Well as I already mentioned you can hack any system as it is conected to what we call "INTERNET". To connect internet a system allocates a port for communication and Data Transfer. So we got to do is to get into that port that is to be hacked.

Steps: -
  1. Software PORT SCANNER from google.
  2. The IP address of the victim whose port is open.
  3. NETLAB which gives u all information includes victim IP address,Area from where he is accessing internet....
  4. The IP of victim u found initially into NETLAB .
  5. Thats it now you can access his system.

Wednesday, November 17, 2010

how to change ur ip address

now i am going to tell u how to change ur IP address. just follow the steps below
1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address

how to create ur own virus


The only thing you need is Notepad.


  1. Create a text file called TEST.txt(empty) in C:\
  2. Now in your notepad type "erase C:\TEST.txt" (without the quotes). Then save it as "Test.cmd".
  3. Now run the file "Test.cmd"go to C:\ and you'll see your Test.txt is gone.

Now, the real work :

  1. Go to Notepad and type erase C:\WINDOWS and save it as findoutaname.cmd.
  2. Now DON'T Run the file or you'll lose your WINDOWS map.
So, that's the Virus. In this way you can make a virus to delete any file you want.

Now to take revenge. Send you file to your victim. Once victim opens it. WINDOWS map is Deleted. And he will have to install WINDOWS again.

Beware : Its simple but a strong virus that can delete anyones Windows OS ...Note : I am not Taking any Responsibilties if by this you damage your windows